Description

The SW801 is a high-performance 8-port 10/100Mbps Ethernet switch module. It provides a simple network connection for your workgroup or servers, offering convenient plug-and-play functionality. This flexible, non-blocking architecture allows users to operate without limitations from bandwidth or media networks.

Each switching port of this 8-port 10/100Mbps Ethernet switch module supports auto-negotiation. It provides an economical, practical, and cost-effective 10/100Mbps LAN hub for broadband local area networks, delivering stable performance and high-throughput data transmission for every end-user connected to the LAN. Each port employs the store-and-forward mode, effectively isolating broadcast storms, reducing error packets, and avoiding network congestion and collisions.

All ports of this switch support half-duplex flow control and full-duplex backpressure standards, enhancing compatibility with bandwidth servers and network protocols. Additionally, LED indicators facilitate the diagnosis of individual port and overall system operational status. The product is energy-efficient and environmentally friendly.

Key Features

IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX/FX Fast Ethernet, IEEE 802.1X, IEEE 802.3ab 100Base-T
8 x 10/100M RJ45 Ports.
1K MAC Address Table with MAC Address Auto-Learning.
1Gbps Non-Blocking Wire-Speed Forwarding Backplane Bandwidth.
External Power Supply DC 5-60V.
Module PCB Dimensions: 73*81.4*30mm

Product Characteristics

Practical Choice, Superior Performance

Provides 8 auto-negotiating 10/100M RJ45 ports, all capable of wire-speed forwarding. Built to enterprise-grade standards, the switch is comprehensively optimized for performance and enhanced overall product performance. Each port supports Auto MDI/MDIX crossover and auto-negotiation for duplex/speed. Supports IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.

Plug-and-Play, No Configuration Required

Plug-and-play with dynamic LED indicators. Ready to use out of the box, all ports feature wire-speed forwarding capability. Rich port types offer great flexibility for user networking setups, helping you establish a 100Mbps wired network within 1 second, significantly simplifying device management and maintenance. Supports desktop and wall-mount installation for simple and convenient deployment.

High-Speed Cache, Lossless Data

Utilizes store-and-forward mode with 1Gbps backplane bandwidth and large-capacity buffer, effectively reducing data forwarding latency, improving forwarding efficiency, and preventing packet loss.

Wide Voltage Input, Low Power Consumption Design

Supports wide voltage input from 5-60V, more durable than standard power supplies. The unit employs low-power-consumption chips; bare board operation is 500mW, full load operation is below 3W.

Specifications

Product Specification
Product Model	SW801
Fixed Port	8 x 10/100Base-T Electrical Ports (Data/Power)
network protocol	IEEE802.310BASE-T;IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3x
Port Characteristics	10/100Base-T auto-detect, full/half duplex MDI/MDI-X adaptive
Forwarding Mode	Store-and-forward (full wire speed)
Backplane Bandwidth	1Gbps (non-blocking)
forwarding rate	Ethernet 10Mbps(Half Duplex) 20Mbps(Full Duplex),10Mbps:14,880pps Fast Ethernet 100Mbps(half-duplex),200Mbps(full-duplex),100Mbps :148800pps
Cascade	All ports can be used as UP-LINK ports.
Packet Forwarding Rate @ 64byte	1Mbit
MAC Address Table	1K
twisted-pair transmission	10BASE-T:Cat3,4,5 UTP(≤100 meter) 100BASE-TX Cat5orlater UTP(≤100 meter)
Overall Power Consumption	Standby power consumption: <3mW; full load power consumption: <1W
LED Indicator	Power Indicator: PWR (Green); Network Indicators: Link, Link/Act (Amber)
Appearance dimensions (L * W * H)	7381.430mm
Net weight/Gross weight	<105g/<107g
work environment
Working humidity	10% -90% RH (non condensing)
working temperature	-40℃-85℃
Storage humidity	10% -90% RH (non condensing)
Storage temperature	-40℃-85℃

FAQ

1、OEM/ODM service is accepted?
Can I get my products customized?
OEM/ODM service is available.

What kind of service do you offer
1）Custom solutions for WIFI system
2）Replacement and enhancement of connectors, antennas, modules, and GPS systems
3）Custom logo design
4）Label creation and application
5）.And more

2、When I can get the price?
Our sales team usually quote within 8 hours after we get your inquiry with full detail.
Any urgent cases, please contact us directly by phone or send eamil to our official email.

3、Will I be able to see a prototype before placing my order?
Yes, Before any order proceeds into production,we require that you see and approve of it.

4、How long is the production lead time ?
Generally our lead time is approximately 7 days depending on the quantity,however if your order has a hot deadline we will do our absolute best to meet your deadline.

5、How to update the firmware of our router to the latest version
If you want to learn more about these services,give us a call, we will be more than happy to guide you through the process.

Industrial Router

Home Router

Outdoor Wireless

Industrial Switch

HUASIFEI MT7987B WIFI7 BE3600 Parameter Introduction

The 5G Wi-Fi 6 router has remarkable features and is well recognized by the market!

Hotel wireless network construction plan

Scenic area wireless network construction plan

SW801 Ethernet Switch Module

SW801 Ethernet Switch Module 1Gbps Non-Blocking Backplane Bandwidth Switch PCBA

Description

Specifications

FAQ

SG803-2 Gigabit Switch Module

SG803-1 Gigabit Switch Module

SG402 Switch Module

SWF502-2 switch module

Company

Products

Solutions

Support

Contact Us

Email: huasifei@huasifei.com

Wechat: +8615986773006

Whatsapp : +8615986773006

Address: Room 619,D3 building,Dalang,Longhua,Shenzhen